Search This Supplers Products:Thermal Laminating FilmHot Stamping FoilLaminating MachineUV VarnishMetalized Laminating FilmHologram Film
US $0.45100 - 40,000 square meter
US $0.1440,001 - 999,999 square meter
Paramtents
Material PET
Type Stretch Film
Usage Packaging Film
Feature Moisture Proof
Hardness Rigid
Processing Type Multiple Extrusion
Transparency Transparent
Corona Treatment Single or double side available
Thickness from 75micron to 350micron
Width 180mm to 1400mm
Packging & Delivery
Min Order100 square meter
Briefing
Detailed
PET Thermal Lamination Film 125micron
PET thermal laminating film is widely used as protective layer on ID card ,cultural and historical document, |
photo,credit card ,license,as well as representative card etc. |
The laminated work possess fine properties of waterproof ,anti-altering, moisture proof. |
Also it will be well reserved against worm, corrosion with high transparence |
General Specifications ( by Roll) | ||||||
SPECIFICATION | AFP-20 | AFP-24 | AFP-75 | AFP-125 | AFP-250 | |
Glossy & Matte | Glossy & Matte | Glossy & Matte | Glossy & Matte | Glossy & Matte | ||
THICKNESS (μm) | PET | 12 micron | 12 micron | 50 micron | 75 micron | 150 micron |
EVA | 8 micron | 12 micron | 25 micron | 50 micron | 100 micron | |
TOTAL | 20 micron | 24 micron | 75 micron | 125 micron | 250 micron | |
YIELD | m²/kg | 41.118 | 35.613 | 10.695 | 6.579 | 3.289 |
kg/m² | 0.0243 | 0.0281 | 0.0935 | 0.1520 | 0.3040 | |
customized thickness-composition available ( from 17micron to 350micron, glossy and matte) | ||||||
TOLERANCE | ±5μm | |||||
WIDTH | 180mm---1400mm (±3mm) | |||||
LENGTH | 50m - 3000m | |||||
PAPER CORE | 76mm (3" inch), 25.4mm (1" inch) | |||||
JOINT | 0 | |||||
CORONA TREATMENT | single or double side | |||||
COMPOUND TEMPERATURE | 110°C - 150°C (230 - 302°F) | |||||
PET Pouch Lamination Film also available (size from 54*86mm to A2, thickness from 32micron to 350micron) |
Guide on operation
1. Better to be used by dry/heat laminator.
2. Adjust roller pressure and temperature according to different types of paper and ink.
3. When using the film for the first time or changing the usual size, a small trial volume before starting massive lamination is proposed.
4. Normal process temperature is 90C-105C (203F - 221F), roller pressure and temperature vary from different types of paper, ink and machines.
5. Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture or powder.
6. Make sure to put the material in place with low temperature and dry.
7. The following situation will affect the final quality of the film during lamination.
A. Using metal ink
B. Ink containing too much wax, dried oil, adhesive, silicon additive and so on.
C. Much too thick ink
D. Ink completely undried yet.
E. Much too humid paper sheet
F. Too much powder on the surface
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.